| 平键 |
1 |
GB/T 1095-2003 |
平键 键槽的剖面尺寸 Square and Rectangular keyways |
| 2 |
GB/T 1096-2003 |
普通型 平键 Square and rectangular keys |
| 3 |
GB/T 1097-2003 |
导向型 平键 Square and rectangular keys |
| 4 |
GB/T 1566-2003 |
薄型平键 键槽的剖面尺寸 Square and Rectangular thin keyways |
| 5 |
GB/T 1567-2003 |
薄型 平键Square and rectangular thin keys |
| 螺栓 |
1 |
GB/T 10-1988 |
沉头方颈螺栓Flat countersunk square neck bolts |
| 2 |
GB/T 11-1988 |
沉头带榫螺栓Flat countersunk nib bolts |
| 3 |
GB/T 12-1988 |
半圆头方颈螺栓Cup head square neck bolts |
| 4 |
GB/T 1228-1991 |
钢结构用高强度大六角头螺栓High strength bolts with large hexagon head for steel structures |
| 5 |
GB/T 1231-1991 |
钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures |
| 6 |
GB/T 12869-1991 |
机床夹具零件及部件 双头螺栓The parts and units of jigs and fixtures–Double end stud |
| 7 |
GB/T 12870-1991 |
机床夹具零件及部件 槽用螺栓The parts and units of jigs and fixtures–Slot bolt |
| 8 |
GB/T 13-1988 |
半圆头带榫螺栓Cup head nib bolts |
| 9 |
GB/T 14-1998 |
大半圆头方颈螺栓 C级Cup head square neck bolts with large head–Product grade C |
| 10 |
GB/T 15049.6-1996 |
CAD 标准件图形文件 几何图形和特性规范 螺栓CAD standard parts file–Specification of geometry and parameters–Bolts |
| 11 |
GB/T 15-1988 |
大半圆头带榫螺栓Cup head nib bolts with large head |
| 12 |
GB/T 152.4-1988 |
紧固件 六角头螺栓和六角螺母用沉孔Fasteners–Counterbores for hexagon bolts and nuts |
| 13 |
GB/T 15389-1994 |
螺杆Threaded rods |
| 14 |
GB/T 158-1996 |
机床工作台 T形槽和相应螺栓Machine tool tables–T-slots and corresponding bolts |
| 15 |
GB/T 16674.1-2004 |
六角法兰面螺栓 小系列Hexagon bolts with flange-Small series |
| 16 |
GB/T 16674.2-2004 |
六角法兰面螺栓 细牙 小系列Hexagon bolts with flange with metric fine pitch thread-Small series |
| 17 |
GB/T 16938-1997 |
紧固件 螺栓、螺钉、螺柱和螺母通用技术条件Fasteners–General requirements for blots,screws,studs and nuts |
| 18 |
GB/T 16939-1997 |
钢网架螺栓球节点用高强度螺栓High strength bolts for joints of space grid structures |
| 19 |
GB/T 18230.1-2000 |
栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级Hexagon bolts for high-strength structural bolting with large width across flats(thread lengths according to GB/T 3106)-Product grade C-Property classes 8.8 and 10.9 |
| 20 |
GB/T 18230.2-2000 |
栓接结构用大六角头螺栓 短螺纹长度 C级 8.8 和 10.9级Hexagon bolts for high-strength structural bolting with large width across flats(short thread length)-Product grade C-Property classes 8.8 and 10.9 |
| 21 |
GB/T 27-1988 |
六角头铰制孔用螺栓 A和B级Hexagon fit bolts–Product grade A and B |
| 22 |
GB/T 28-1988 |
六角头螺杆带孔铰制孔用螺栓 A和B级Hexagon fit bolts with Split pin hole on shank–Product grade A and B |
| 23 |
GB/T 29.1-1988 |
六角头头部带槽螺栓 A和B级Hexagon bolts with slot on head–Product grade A and B |
| 24 |
GB/T 29.2-1988 |
十字槽凹穴六角头螺栓Cross recessed hexagon bolts with indentation |
| 25 |
GB/T 3098.10-1993 |
紧固件机械性能有色金属制造的螺栓、螺钉、螺柱和螺母Mechanical properties of fasteners Bolts, scrows, studs and nuts made of non-ferrous metals |
| 26 |
GB/T 3098.1-2000 |
紧固件机械性能 螺栓、螺钉和螺柱Mechanical properties of fasteners made of carbon steel and alloy steel–Part 1:Bolts,screws and studs |
| 27 |
GB/T 3098.13-1996 |
紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm Mechanical properties of fasteners–Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm |
| 28 |
GB/T 3098.6-2000 |
紧固件机械性能 不锈钢螺栓、螺钉和螺柱Mechanical properties of fasteners-Bolts,screws and studs made of stainless-steel |
| 29 |
GB/T 3099-1982 |
螺栓、螺钉、螺母及附件名词术语Bolts,screws,nuts and accessories-Terminology and nomenclature |
| 30 |
GB/T 31.1-1988 |
六角头螺杆带孔螺栓 A和B级Hexagon bolts with split pin hole on shank–Product grade A and B |
| 31 |
GB/T 31.2-1988 |
六角头螺杆带孔螺栓 细杆 B级Hexagon bolts with split pin hole on shank–Reduced shank–Product grade B |
| 32 |
GB/T 31.3-1988 |
六角头螺杆带孔螺栓 细牙 A和B级Hexagon bolts with split pin hole on shank–Fine pitch thread–Product grade A and B |
| 33 |
GB/T 3103.1-2002 |
紧固件公差 螺栓、螺钉、螺柱和螺母Tolerances for fasteners- Bolts,screws, studs and nuts |
| 34 |
GB/T 3103.2-1982 |
紧固件公差 用于精密机械的螺栓,螺钉和螺母Tolerances for fasteners–Bolts,screws and nuts for fine mechanics |
| 35 |
GB/T 3105-2002 |
普通螺栓和螺钉 头下圆角半径General purpose bolts and screws-Radii under the head |
| 36 |
GB/T 3106-1982 |
螺栓,螺钉和螺柱的公称长度和普通螺栓的螺纹长度 |
| Bolts,screws and studs–Nominal lengths and thread lengths for general purpose bolts |
| 37 |
GB/T 32.1-1988 |
六角头头部带孔螺栓 A和B级Hexagon bolts with wire holes on head–Product grade A and B |
| 38 |
GB/T 32.2-1988 |
六角头头部带孔螺栓 细杆 B级Hexagon bolts with wire holes on head–Reduced shank–Product grade B |
| 39 |
GB/T 32.3-1988 |
六角头头部带孔螺栓 细牙 A和B级Hexagon bolts with wire holes on head–Fine pitch thread–Product grade A and B |
| 40 |
GB/T 3227-2000 |
螺栓螺母用装配工具 机动套筒工具的传动四方Assembly tools for screws and nuts-Driving squares for power socket tools |
| 41 |
GB/T 3228-2000 |
螺栓螺母用装配工具 冲击式机动四方传动套筒的尺寸Assembly tools for screws and nuts-Machine-operated square drive sockets (“impact”)-Dimensions |
| 42 |
GB/T 3229-2000 |
螺栓螺钉用装配工具 机动螺刀头的六角传动端Assembly tools for bolts and screws-Hexagon drive ends for machine-operated screwdriver bits |
| 43 |
GB/T 35-1988 |
小方头螺栓 B级Square head bolts with small head–Product grade B |
| 44 |
GB/T 3632-1995 |
钢结构用扭剪型高强度螺栓连接副Sets of torshear type high strength bolt hexagon nut and plain washer for steel structures |
| 45 |
GB/T 3633-1995 |
钢结构用扭剪型高强度螺栓连接副 技术条件Technical requirement for sets of torshear type high strength bolt hexagon nut and plain washer for steel structures |
| 46 |
GB/T 37-1988 |
T型槽用螺栓Bolts for T–Slot |
| 47 |
GB/T 3750.3-1983 |
卡套式铰接六角螺栓Hollow screws |
| 48 |
GB/T 5276-1985 |
紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注Fasteners–Bolts,screws,studs and nuts–Symbols and designations of dimensions |
| 49 |
GB/T 5277-1985 |
紧固件 螺栓和螺钉通孔Fasteners–Clearance holes for bolts and screws |
| 50 |
GB/T 5286-2001 |
螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts–General plan |
| 51 |
GB/T 5650-1985 |
扩口式管接头空心螺栓Flared type tube fittings–Inverted flare bolts |
| 52 |
GB/T 5779.1-2000 |
紧固件表面缺陷 螺栓、螺钉和螺柱一般要求Fasteners-Surface discontinuities-Bolts,screws and studs for general requirements |
| 53 |
GB/T 5779.3-2000 |
紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求Fasteners-Surface discontinuities-Bolts,screws and studs for special requirements |
| 54 |
GB/T 5780-2000 |
六角头螺栓 C级Hexagon head bolts-Product grade C |
| 55 |
GB/T 5781-2000 |
六角头螺栓 全螺纹 C级Hexagon head bolts-Full thread-Product grade C |
| 56 |
GB/T 5782-2000 |
六角头螺栓Hexagon head bolts |
| 57 |
GB/T 5783-2000 |
六角头螺栓 全螺纹Hexagon head bolts-Full thread |
| 58 |
GB/T 5784-1986 |
六角头螺栓 细杆 B级Hexagon head bolts–Reduced shank–Product grades B |
| 59 |
GB/T 5785-2000 |
六角头螺栓 细牙Hexagon head bolts with fine pitch thread |
| 60 |
GB/T 5786-2000 |
六角头螺栓 细牙 全螺纹Hexagon head bolts with fine pitch thread-Full thread |
| 61 |
GB/T 5789-1986 |
六角法兰面螺栓 加大系列 B级Hexagon flange bolts–Heavy series–Product grade B |
| 62 |
GB/T 5790-1986 |
六角法兰面螺栓 加大系列 细杆 B级Hexagon flange bolts–Heavy series–Product grade B |
| 63 |
GB/T 6188-2000 |
螺栓和螺钉用内六角花形Hexalobular internal driving feature for bolts and screws |
| 64 |
GB/T 7559-1987 |
纤维增强塑料层板螺栓连接挤压强度试验方法FRP Laminates-test method for bearing strength by bolted joints |
| 65 |
GB/T 794-1993 |
加强半圆头方颈螺栓Strengthened cap head square neck bolts |
| 66 |
GB/T 798-1988 |
活节螺栓Eye bolts |
| 67 |
GB/T 799-1988 |
地脚螺栓Eyelet bolts |
| 68 |
GB/T 800-1988 |
沉头双榫螺栓Flat countersunk double nib bolts |
| 69 |
GB/T 801-1998 |
小半圆头低方颈螺栓 B级Cup head square neck bolts with small head and short neck–Product grade B |
| 70 |
GB/T 8-1988 |
方头螺栓 C级Square head bolts–Product grade C |
| 71 |
GB/T 8262-1987 |
圆头椭圆颈螺栓Bolts,round head with oval neck |
| 72 |
GB/T 892-1986 |
螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt |
| 73 |
GB/T 9074.11-1988 |
十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indention and plain washer assemblies |
| 74 |
GB/T 9074.1-2002 |
螺栓或螺钉和平垫圈组合件Bolt or screw and washer assemblies with plain washers |
| 75 |
GB/T 9074.12-1988 |
十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies |
| 76 |
GB/T 9074.13-1988 |
十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plan washer assemblies |
| 77 |
GB/T 9074.15-1988 |
六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies |
| 78 |
GB/T 9074.16-1988 |
六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies |
| 79 |
GB/T 9074.17-1988 |
六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies |
| 垫圈 |
1 |
GB 583-1965 |
船用法兰软垫圈Marine pipe flanges–Soft gasket |
| 2 |
GB/T 1021-1976 |
角形垂直单耳止动垫圈Lock washers with angular upturn tab perpendicular to the lug |
| 3 |
GB/T 1022-1976 |
角形单耳止动垫圈Lock washers with angular upturn tab in line to the lug |
| 4 |
GB/T 1023-1976 |
角形垂直外舌止动垫圈Lock washers with angular upturn tab perpendicular to the external tab |
| 5 |
GB/T 1024-1976 |
角形外舌止动垫圈Lock washers with angular upturn tab in line to the external tab |
| 6 |
GB/T 1030-1988 |
内球面垫圈Inner sphere washers |
| 7 |
GB/T 10446-1989 |
滑动轴承 整圆止推垫圈 尺寸和公差Plain bearings–Ring type thrust washers made from strip–Dimensions and tolerances |
| 8 |
GB/T 10447-1989 |
滑动轴承 半圆止推垫圈 要素和公差Plain bearings–Pressed bimetallic half thrust washers–Features and tolerances |
| 9 |
GB/T 1230-1991 |
钢结构用高强度垫圈High strength plain washers for steel structures |
| 10 |
GB/T 1231-1991 |
钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件 |
| Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures |
| 11 |
GB/T 12385-1990 |
管法兰用垫片密封性能试验方法Test method for sealing characteristics of gaskets for pipe flanges |
| 12 |
GB/T 12871-1991 |
机床夹具零件及部件 快换垫圈The parts and units of jigs and fixtures Smooth face clamp plate |
| 13 |
GB/T 14180-1993 |
缠绕式垫片试验方法 |
| 14 |
GB/T 15049.9-1996 |
CAD 标准件图形文件 几何图形和特性规范 垫圈CAD standard parts file–Specification of geometry and parameters–Washers |
| 15 |
GB/T 15601-1995 |
管法兰用金属包覆垫片Metallic envelope gaskets for pipe flanges |
| 16 |
GB/T 18230.5-2000 |
栓接结构用平垫圈 淬火并回火Plain washers for high-strength structural bolting hardened and tempered |
| 17 |
GB/T 2502-1989 |
船用法兰软垫圈(四进位)Marine pipe flanges-soft gasket |
| 18 |
GB/T 2861.15-1990 |
冲模导向装置 垫圈Guide unit for press tools–Washer |
| 19 |
GB/T 3103.3-2000 |
紧固件公差 平垫圈Tolerances for fasteners-Plain washers |
| 20 |
GB/T 3762-1983 |
卡套式管接头用尖角密封垫圈Bite type tube fittings–Tipping washer |
| 21 |
GB/T 4605-2003 |
滚动轴承 推力滚针和保持架组件及推力垫圈Rolling bearings-Thrust needle roller and cage assemblies,thrust washers |
| 22 |
GB/T 4678.13-2003 |
压铸模零件 第13部分:推板垫圈Die-casting die components-Part 13: Ejector plate washer |
| 23 |
GB/T 5222-1985 |
弹簧垫圈用梯形钢丝Trapezed steel wire for spring washer |
| 24 |
GB/T 5286-2001 |
螺栓、螺钉和螺母用平垫圈 总方案Plain washers for bolts,screws and nuts–General plan |
| 25 |
GB/T 5287-2002 |
特大垫圈 C级Plain washers-Extra large series-Product grade C |
| 26 |
GB/T 5652-1985 |
扩口式管接头锁紧螺母垫圈Flared type tube fittings–Back-up washer |
| 27 |
GB/T 583-1965 |
船用法兰软垫圈Marine pipe flanges–Soft gasket |
| 28 |
GB/T 7244-1987 |
重型弹簧垫圈Single coil spring lock washers, heavy type |
| 29 |
GB/T 7245-1987 |
鞍形弹簧垫圈Curved single coil spring lock washers |
| 30 |
GB/T 7246-1987 |
波形弹簧垫圈Wave single coil spring lock washers |
| 31 |
GB/T 848-2002 |
小垫圈 A级Plain washers-Small series-Product grade A |
| 32 |
GB/T 849-1988 |
球面垫圈Washers with ball face |
| 33 |
GB/T 850-1988 |
锥面垫圈Washers with cone face |
| 34 |
GB/T 851-1988 |
开口垫圈Washers with split |
| 35 |
GB/T 852-1988 |
工字钢用方斜垫圈Square taper washers for I section |
| 36 |
GB/T 853-1988 |
槽钢用方斜垫圈Square taper washers for slot section |
| 37 |
GB/T 854-1988 |
单耳止动垫圈Tab washers with long tab |
| 38 |
GB/T 855-1988 |
双耳止动垫圈Tab washers with long tab and wing |
| 39 |
GB/T 856-1988 |
外舌止动垫圈External tab washers |
| 40 |
GB/T 858-1988 |
圆螺母用止动垫圈Tab washers for round nut |
| 41 |
GB/T 859-1987 |
轻型弹簧垫圈Single coil spring lock washers,light type |
| 42 |
GB/T 860-1987 |
鞍形弹性垫圈Curved spring washers |
| 43 |
GB/T 861.1-1987 |
内齿锁紧垫圈Lock washers internal teeth |
| 44 |
GB/T 861.2-1987 |
内锯齿锁紧垫圈Serrated lock washers interal teeth |
| 45 |
GB/T 862.1-1987 |
外齿锁紧垫圈Lock washers external teeth |
| 46 |
GB/T 862.2-1987 |
外锯齿锁紧垫圈Serrated lock washers exteral teeth |
| 47 |
GB/T 9074.10-1988 |
十字槽半沉头螺钉和锥形锁紧垫圈组合件Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies |
| 48 |
GB/T 9074.11-1988 |
十字槽凹穴六角头螺栓和平垫圈组合件Cross recessed hexagon bolt with indention and plain washer assemblies |
| 49 |
GB/T 9074.1-2002 |
螺栓或螺钉和平垫圈组合件Bolt or screw and washer assemblies with plain washers |
| 50 |
GB/T 9074.12-1988 |
十字槽凹穴六角头螺栓和弹簧垫圈组合件Cross recessed hexagon bolt with indentation and single coil spring lock washer assemblies |
| 51 |
GB/T 9074.13-1988 |
十字槽凹穴六角头螺栓、弹簧垫圈和平垫圈组合件Cross recessed hexagon bolt with indentation, single coil lock washer and plan washer assemblies |
| 52 |
GB/T 9074.15-1988 |
六角头螺栓和弹簧垫圈组合件Hexagon head bolt and single coil spring lock washer assemblies |
| 53 |
GB/T 9074.16-1988 |
六角头螺栓和外锯齿锁紧垫圈组合件Hexagon head bolt and serrated lock washer external teeth assemblies |
| 54 |
GB/T 9074.17-1988 |
六角头螺栓、弹簧垫圈和平垫圈组合件Hexagon head bolt, single coil spring lock washer and plain washer assemblies |
| 55 |
GB/T 9074.18-2002 |
自攻螺钉和平垫圈组合件Tapping screw and washer assemblies with plain washers |
| 56 |
GB/T 9074.20-2004 |
十字槽凹穴六角头自攻螺钉和平垫圈组合件Cross recessed hexagon head tapping screw with indentation and washer assemblies with plain washers |
| 57 |
GB/T 9074.2-1988 |
十字槽盘头螺钉和外锯齿锁紧垫圈组合件Cross recessed pan head screw and serrated lock washer external teeth assemblies |
| 58 |
GB/T 9074.26-1988 |
组合件用弹簧垫圈Single coil spring lock washer for assembly |
| 59 |
GB/T 9074.27-1988 |
组合件用外锯齿锁紧垫圈Serrated lock washer external teeth for assembly |
| 60 |
GB/T 9074.28-1988 |
组合件用锥形锁紧垫圈Countersunk external toothed lock washer for assembly |
| 61 |
GB/T 9074.3-1988 |
十字槽盘头螺钉和弹簧垫圈组合件Cross recessed pan head screw and single coil spring lock washer assemblies |
| 62 |
GB/T 9074.4-1988 |
十字槽盘头螺钉、弹簧垫圈和平垫圈组合件Cross recessed pan head screw,single coil spring lock washer and plain washer assemblies |
| 63 |
GB/T 9074.5-2004 |
十字槽小盘头螺钉和平垫圈组合件Cross recessed small pan head screw and washer assemblies with plain washers |
| 64 |
GB/T 9074.7-1988 |
十字槽小盘头螺钉和弹簧垫圈组合件Cross recessed small pan head screw and single coil spring lock washer assemblies |
| 65 |
GB/T 9074.8-1988 |
十字槽小盘头螺钉、弹簧垫圈及平垫圈组合件Cross recessed small pan head screw,single coil spring lock washer and plain washer assemblies |
| 66 |
GB/T 9074.9-1988 |
十字槽沉头螺钉和锥形锁紧垫圈组合件Cross recessed countersunk head screw and countersunk external toothed lock washer assemblies |
| 67 |
GB/T 93-1987 |
标准型弹簧垫圈Single coil spring lock washers,normal type |
| 68 |
GB/T 94.1-1987 |
弹性垫圈技术条件 弹簧垫圈Specifications for spring washers–Single coil spring lock washers |
| 69 |
GB/T 94.2-1987 |
弹性垫圈技术条件 齿形、锯齿锁紧垫圈Specifications for spring washers–Toothed lock and serrated lock washers |
| 70 |
GB/T 94.3-1987 |
弹性垫圈技术条件 鞍形、波形弹性垫圈Specifications for spring washers–Curved and wave spring washers |
| 71 |
GB/T 95-2002 |
平垫圈 C级Plain washers-Product grade C |
| 72 |
GB/T 955-1987 |
波形弹性垫圈Wave spring washers |
| 73 |
GB/T 956.1-1987 |
锥形锁紧垫圈Countersunk external toothed lock washers |
| 74 |
GB/T 956.2-1987 |
锥形锯齿锁紧垫圈Countersunk serrated external toothed lock washers |
| 75 |
GB/T 96.1-2002 |
大垫圈 A级Plain washers-Large series-Product grade A |
| 76 |
GB/T 96.2-2002 |
大垫圈 C级Plain washers-Large series-Product grade C |
| 77 |
GB/T 97.1-2002 |
平垫圈 A级Plain washers-Product grade A |
| 78 |
GB/T 97.2-2002 |
平垫圈 倒角型 A级Plain washers,chamfered-Product grade A |
| 79 |
GB/T 97.3-2000 |
销轴用平垫圈Plain washers for clevis pins |
| 80 |
GB/T 97.4-2002 |
平垫圈 用于螺钉和垫圈组合件Plain washers for screw and washer assemblies |
| 81 |
GB/T 97.5-2002 |
平垫圈 用于自攻螺钉和垫圈组合件Plain washers for tapping screw and washer assemblies |
| 82 |
GB/T 98-1988 |
止动垫圈技术条件Specification for tab washer |
| 链条 |
1 |
GB/T 13795-1992 |
工业链条用冷轧钢带 |
| 2 |
GB/T 13796-1992 |
工业链条用冷拉钢 |
| 3 |
GB/T 14212-2003 |
摩托车链条 技术条件和试验方法Motor cycle chains-Characteristics and test methods |
| 4 |
GB/T 15390-1994 |
工程用钢制焊接弯板链和链轮Welded steel type cranked link mill chains and chain wheels |
| 5 |
GB/T 17482-1998 |
输送用模锻易拆链Drop-forged rivetless chains for conveyors |
| 6 |
GB/T 18342-2001 |
链条炉排锅炉用煤技术条件Specifications of coal for chain and travelling grate stoker boiler |
| 7 |
GB/T 18669-2002 |
船用锚链圆钢Steel bars for ship anchor chain |
| 8 |
GB/T 3579-2002 |
自行车链条 技术条件和试验方法Cycle chains–Characteristics and test methods |
| 9 |
GB/T 9785-1988 |
链条、链轮术语Terminology of chains and chainwheels |
| 连轴器 |
1 |
GB/T 10614-1989 |
芯型弹性联轴器Resilient coupling with core element |
| 2 |
GB/T 12458-2003 |
联轴器分类Coupling-Classfication |
| 3 |
GB/T 12922-1991 |
弹性阻尼簧片联轴器Elastic damping leaf coupling |
| 4 |
GB/T 14653-1993 |
挠性杆联轴器Flexible link coupling |
| 5 |
GB/T 2496-1996 |
弹性环联轴器Coupling with flexible ring |
| 6 |
GB/T 3507-1983 |
机械式联轴器公称扭矩系列Nominal torque series of the mechanical coupling |
| 7 |
GB/T 3852-1997 |
联轴器轴孔和联结型式与尺寸Types and dimension for coupling bores and their connection |
| 8 |
GB/T 3931-1997 |
联轴器 术语Coupling–Vocabulary |
| 9 |
GB/T 4323-2002 |
弹性套柱销联轴器Pin coupling with elastic sleeve |
| 10 |
GB/T 5014-2003 |
弹性柱销联轴器Pin coupling elastomer |
| 11 |
GB/T 5015-2003 |
弹性柱销齿式联轴器Gear coupling with pin elastomer |
| 12 |
GB/T 5047-1985 |
牙科手机 联轴节尺寸Dental hand pieces–Coupling dimensions |
| 13 |
GB/T 5272-2002 |
梅花形弹性联轴器Coupling with elastic spider |
| 14 |
GB/T 5843-2003 |
凸缘联轴器Flange coupling |
| 15 |
GB/T 5844-2002 |
轮胎式联轴器Coupling with rubber type element |
| 16 |
GB/T 6069-2002 |
滚子链联轴器Roller chain coupling |
| 17 |
GB/T 7549-1987 |
球笼式同步万向联轴器型式、基本参数和主要尺寸Synchronizing universal coupling with ball and sacket–Type,foundational parameters and main dimensions |
| 18 |
GB/T 7550-1987 |
球笼式同步万向联轴器 试验方法Synchronizing universal coupling with ball and sacket |
|
13 |
GB/T 117-2000 |
圆锥销Taper pins |
|
14 |
GB/T 118-2000 |
内螺纹圆锥销Taper pins with internal thread |
|
15 |
GB/T 119.1-2000 |
圆柱销 不淬硬钢和奥氏体不锈钢Parallel pins,of unhardened steel and austenitic stainless steel |
|
16 |
GB/T 119.2-2000 |
圆柱销 淬硬钢和马氏体不锈钢Parallel pins, of hardened steel and martensitic stainless steel(Dowel pins) |
|
18 |
GB/T 120.1-2000 |
内螺纹圆柱销 不淬硬钢和奥氏体不锈钢Parallel pins with internal thread,of unhardened steel and austenitic stainless steel |
|
19 |
GB/T 120.2-2000 |
内螺纹圆柱销 淬硬钢和马氏体不锈钢Parallel pins with internal thread,of hardened steel and martensitic stainless steel |
|
20 |
GB/T 121-1986 |
销技术条件Specifications for pins |
|
22 |
GB/T 13683-1992 |
销 剪切试验方法Pins and grooved pins–Shear test |
|
23 |
GB/T 13829.1-2004 |
槽销 带导杆及全长平行沟槽Grooved pins-Full-length parallel grooved,with pilot |
|
24 |
GB/T 13829.2-2004 |
槽销 带倒角及全长平行沟槽Grooved pins-Full-length parallel grooved,with chamfer |
|
25 |
GB/T 13829.3-2004 |
槽销 中部槽长为1/3全长Grooved pins-One-third-length centre grooved |
|
26 |
GB/T 13829.4-2004 |
槽销 中部槽长为1/2全长Grooved pins-Half-length centre grooved |
|
27 |
GB/T 13829.5-2004 |
槽销 全长锥槽Grooved pins-Full-length taper grooved |
| 销 |
28 |
GB/T 13829.6-2004 |
槽销 半长锥槽Grooved pins-Half-length taper grooved |
|
29 |
GB/T 13829.7-2004 |
槽销 半长倒锥槽Grooved pins-Half-length reverse-taper grooved |
|
30 |
GB/T 13829.8-2004 |
圆头槽销Grooved pins with round head |
|
31 |
GB/T 13829.9-2004 |
沉头槽销Grooved pins with countersunk head |
|
58 |
GB/T 5014-2003 |
弹性柱销联轴器Pin coupling elastomer |
|
59 |
GB/T 5015-2003 |
弹性柱销齿式联轴器Gear coupling with pin elastomer |
|
60 |
GB/T 5278-1985 |
紧固件 开口销孔和金属丝孔Fasteners–Split pin holes and wire holes |
|
61 |
GB/T 7726.3-1998 |
铰接式客车机械连接装置 球头销Mechanical connections of articulated bus. Ball pin |
|
63 |
GB/T 877-1986 |
开尾圆锥销Taper pins with split |
|
64 |
GB/T 878-1986 |
螺纹圆柱销Parallel pins with external thread |
|
65 |
GB/T 879.1-2000 |
弹性圆柱销 直槽 重型Spring-type straight pins-Slotted,heavy duty |
|
66 |
GB/T 879.2-2000 |
弹性圆柱销 直槽 轻型Spring-type straight pins-Slotted,light duty |
|
67 |
GB/T 879.3-2000 |
弹性圆柱销 卷制 重型Spring-type straight pins-Coiled,heavy duty |
|
68 |
GB/T 879.4-2000 |
弹性圆柱销 卷制 标准型Spring-type straight pins-Coiled,standard duty |
|
69 |
GB/T 879.5-2000 |
弹性圆柱销 卷制 轻型Spring-type straight pins-Coiled,light duty |
|
70 |
GB/T 880-1986 |
带孔销Pins with split pin hole |
|
71 |
GB/T 881-2000 |
螺尾锥销Taper pins with external thread |
|
72 |
GB/T 882-1986 |
销轴Clevis pins with head |
|
73 |
GB/T 883-1986 |
锥销锁紧挡圈Lock rings with cone pin |
|
76 |
GB/T 91-2000 |
开口销Split pins |
|
77 |
GB/T 9297-1988 |
铝合金插销Bolts for side hung aluminium alloy doors |
|
78 |
GB/T 9446-1988 |
焊接用插销冷裂纹试验方法Welding–Cold cracking test method using implants |
|
79 |
GB/T 97.3-2000 |
销轴用平垫圈Plain washers for clevis pins |
|
1 |
GB/T 10430-1989 |
烧结金属摩擦片结合强度测定方法Standard test method for binding strength of sintered metal friction elements |
|
|
2 |
GB/T 11834-2000 |
工业机械用石棉摩擦片Asbestos friction linings for industrial machines |
|
3 |
GB/T 11863-1989 |
制动蹄摩擦片切削机Machine for cutting friction lining of brake shoe |
| 摩擦片 |
4 |
GB/T 12065-1989 |
制动蹄摩擦片钻铆磨机The equipment for drilling rivetting and grinding brake-shoe lining |
|
1 |
GB/T 10042-2003 |
离合器术语Clutch – Terminology |
|
2 |
GB/T 10043-2003 |
离合器分类Clutch – Classification |
|
3 |
GB/T 15096-1994 |
液粘调速离合器Hydroviscous varialbe speed clutch |
|
4 |
GB/T 15141-1994 |
湿式离合器摩擦元件 试验方法Test method for friction element of wet clutch |
|
5 |
GB/T 3871.5-1993 |
农业轮式和履带拖拉机试验方法 第5部分 转向和离合器操纵试验Test methods for agricultural wheeled and tracklaying tractors . Part 5: Turning and clutch operating tests |
|
6 |
GB/T 5764-1998 |
汽车用离合器面片Clutch facings for automobiles |
|
7 |
GB/T 6073-1985 |
LT型高弹性摩擦离合器Type LT highly elastic friction clutch |
|
8 |
GB/T 7631.4-1989 |
润滑剂和有关产品(L类)的分类 第4部分:F组(主轴、轴承和有关离合器)Lubricants and related products (class L)–Classification–Part 4:Family F (Spindle bearings, bearings and associated clutches) |
| 离合器 |
9 |
GB/T 9149-1988 |
磁粉离合器通用技术条件General specification for magnetic particle clutch |
|
1 |
GB/T 15049.8-1996 |
CAD 标准件图形文件 几何图形和特性规范 挡圈CAD standard parts file–Specification of geometry and parameters–Rings |
|
2 |
GB/T 883-1986 |
锥销锁紧挡圈Lock rings with cone pin |
|
3 |
GB/T 884-1986 |
螺钉锁紧挡圈Lock ring with screw |
|
4 |
GB/T 885-1986 |
带锁圈的螺钉锁紧挡圈Lock rings with screw and circlip |
|
5 |
GB/T 886-1986 |
轴肩挡圈Rings for shoulder |
|
6 |
GB/T 891-1986 |
螺钉紧固轴端挡圈Lock rings at the end of shaft with screw |
|
7 |
GB/T 892-1986 |
螺栓紧固轴端挡圈Lock rings at the end of shaft with bolt |
|
8 |
GB/T 893.1-1986 |
孔用弹性挡圈 A型Circlips for holes–Type A |
|
9 |
GB/T 893.2-1986 |
孔用弹性挡圈 B型Circlips for hole–Type B |
|
10 |
GB/T 894.1-1986 |
轴用弹性挡圈 A型Circlips for shaft–Type A |
|
11 |
GB/T 894.2-1986 |
轴用弹性挡圈 B型Circlips for shaft–Type B |
|
12 |
GB/T 895.1-1986 |
孔用钢丝挡圈Roundwire snap rings for hole |
| 挡圈 |
13 |
GB/T 895.2-1986 |
轴用钢丝挡圈Roundwire snap rings for shaft |
|
14 |
GB/T 896-1986 |
开口挡圈”E” rings |
|
15 |
GB/T 959.1-1986 |
挡圈技术条件 弹性挡圈Specifications for ring–Circlips |
|
16 |
GB/T 959.2-1986 |
挡圈技术条件 钢丝挡圈Specifications for ring–Round wire snap rings |
|
17 |
GB/T 959.3-1986 |
挡圈技术条件 切制挡圈Specifications for ring–Cutting rings |
|
18 |
GB/T 960-1986 |
夹紧挡圈Grip rings |
